Setting The Voice Mail Tone - Panasonic KX-TC1723CB Operating Instructions Manual

PQQX13225ZA-BM-4 01.7.17 8:57 AM y [ W 46
" Voice Mail Service

Setting the Voice Mail Tone

If your voice mail service sends a voice mail tone after a new message
has been recorded, set to "On". "Voicemail" and the recording line(s)
will be displayed while the handset is off the base unit and the VOICE
MAIL indicator on the base unit will flash when a message has been
recorded in your mailbox. You will hear a series of voice mail tones
followed by a dial tone after pressing
provider for details about your service.)
Set to "Off" if:
—you do not subscribe to a voice mail service,
—your voice mail service does not send a voice mail tone, or
—the unit is connected to a PBX.
Your phone comes from the factory set to "Off".
Make sure the unit is in the standby mode.
(REDIAL/PAUSE/FUNCTION)
1 Press
(›)
2 Press or
points to "Program".
EDIT (fl)
3
Press
(›)
4 Press or
points to "Voicemail tone".
EDIT (fl)
5 Press
(›)
6 Press (Line1) or
the desired line.
(›)
7 Press or
EDIT (fl)
8 Press
≥A beep sounds.
≥To program the other line, start again from
step 4.
≥To return to the standby mode, press (OFF).
≥You can exit the programming mode any time by pressing (OFF).
46
or
.
(‹)
repeatedly until the arrow
.
(‹)
repeatedly until the arrow
.
(‹)
(Line2) to select
(‹)
to select "Off" or "On".
(Save key).
. (Contact your service
Ringer volume
1Program
Save directory
Save mailbox#
1Voicemail tone
Set line mode
Voicemail tone
=Line1 =Line2
4 3
Voicemail tone
Line1:Off
1=Save
4 3
Voicemail tone
Line1:On