Selecting The Ringer Volume - Panasonic KX-TG2650N Operating Instructions Manual

Selecting the Ringer Volume

You can set the handset and base unit ringer volumes to HIGH, LOW or
OFF. If set to OFF, the handset/base unit will not ring.
Handset ringer volume
Make sure the unit is in the standby mode initially.
1 Press
(FUNCTION/CH)
2 Press or
Ö
arrow points to "Ringer volume",
and press
á
Press or
3
Ö
volume.
•The selected volume is displayed and rings.
•To turn the ringer OFF, press and hold
Ö until 2 beeps sound. When set to OFF,
"Ringer off" will flash for about 45
seconds before the handset returns to the
standby mode.
To turn the ringer ON, press
in step 3.
•The ringer will sound at the LOW level.
•You can also select the ringer volume while a call is being received. Press Ö or
Ñ while the unit is ringing.
Base unit ringer volume
Make sure the unit is in the standby mode
initially. (You can also select the ringer
volume while a call is being received.)
•To select HIGH or LOW, press
. Each time you press the
(HOLD/RINGER)
button, the selected ringer volume will be
displayed and ring.
•To turn the ringer OFF, press and hold
(HOLD/RINGER)
"Ringer off" will be displayed.
•To turn the ringer ON, press
. The ringer will sound at
(HOLD/RINGER)
the HIGH level.
.
repeatedly until the
Ñ
(Yes key).
to select the desired
Ñ
or
Ñ
until 2 beeps sound.
Save directory
H
Ringer volume
GF
Ringer
HIGH
Low
GF
Ringer
LOW
Low
GF
Ö
OFF
Ringer
HIGH
Low
Ringer
LOW
Low
OFF
H
=Yes
High
High
Ringer off
High
High
Ringer off
17