One-Touch Dialer; Storing A Phone Number In The Direct Button - Panasonic KX-TG2650N Operating Instructions Manual

One-Touch Dialer

You can store a phone number in the
stored number is dialed with a one-touch operation.

Storing a Phone Number in the DIRECT Button

Make sure the unit is in the standby mode initially.
Press
1
(FUNCTION/CH)
2 Press
Ö
points to "Program".
Press
3
á
While the arrow points to "Save
4
DIRECT#", press
Enter a phone number, up to 22 digits.
5
•Each time you press (CLEAR/INTERCOM) the
digit to the left of the cursor is erased. To erase
all digits, press and hold (CLEAR/INTERCOM).
•To move the cursor, press Ü or á.
6 Press
Ö
•If you want to edit the entered number, press
Ñ (Edit key) and return to step 5.
Press
7
á
•A beep sounds.
•To return to the standby mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF).
•If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone
number in step 5. This counts as one digit (p. 49).
34
.
or repeatedly until the arrow
Ñ
(Yes key).
(Yes key).
á
(Next key).
(Save key).
button of the handset. The
(DIRECT)
H
Program
GF
H
Save DIRECT#
Set flash time
GF
IH
1234567890123456
789012
IH
1234567890123456
789012
F
=Edit
1234567890123456
789012
Save DIRECT#
H
=Yes
H
=Yes
G
=Next
G
=Next
H
=Save