Programmable Functions - Panasonic KX-TG2650N Operating Instructions Manual

Programmable Functions

You can program the following function items using the handset near
the base unit. The display shows the programming instructions. See the
corresponding pages for function details.
Make sure the unit is in the standby mode initially.
Press
(FUNCTION/CH)
<Function menu>*
H
Save directory
Ringer volume
Program
Press
á
<Function menu>*
H
Save DIRECT#
Set flash time
Save mailbox#
Voicemail tone
Set line mode
Talk switching
Set dial mode
During programming:
*To select a desired function item, press
arrow points to the item. Then press
•You can exit the programming mode any time by pressing (OFF).
•If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
•If the handset has lost communication with the base unit, 3 beeps sound and "No
link to base. Place on cradle and try again." is displayed.
.
To store an item in the directory (p. 36).
To select the ringer volume (p. 17).
.
To store a phone number in the DIRECT button
(p. 34).
To select the flash time (p. 51).
To store a voice mail access number (p. 46).
To set the voice mail tone (p. 47).
To select the line mode (p. 14).
To set the auto talk feature (p. 16).
To select the dial mode (p. 13).
or repeatedly until the
Ö Ñ
to go to the next step.
á
15