Setting The Voice Mail Tone - Panasonic KX-TG2553CS Operating Instructions Manual

Voice Mail Service
To erase a stored number
Press and hold
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).

Setting the Voice Mail Tone

If your voice mail service sends a voice mail tone after a new message has
been recorded, set to "On". "Voicemail" and "
the VOICE MAIL indicator on the base unit will flash when a message has
been recorded in your mailbox. You will hear a series of voice mail tones
followed by a dial tone after pressing
(Contact your service provider for details about your service.)
Set to "Off" if:
—you do not subscribe to a voice mail service,
—your voice mail service does not send a voice mail tone, or
—the unit is connected to a PBX.
Your phone comes from the factory set to "Off".
Make sure the handset is in the standby mode initially.
Press
1
(FUNCTION/EXIT/CH)
Press
2
Ö
points to "Program".
Press
3
FWD/EDIT á
Press
4
Ö
points to "Voicemail tone".
Press
5
FWD/EDIT á
Press
6
Ö
Press
FWD/EDIT á
•A beep sounds.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
42
in step 6 on page 41.
(CLEAR)
or repeatedly until the arrow
Ñ
(Yes key).
or repeatedly until the arrow
Ñ
(Yes key).
or to select "On" or "Off".
Ñ
(Save key).
.
(TALK)
.
" will be displayed and
H
Program
GF H
Save mailbox#
H
Voicemail tone
GF H
Voicemail tone
GF H
=Save
Voicemail tone
=Yes
=Yes
:Off
:On