Fax Diagnostics - Samsung SL-M4580FX Service Manual

Table of Contents

Advertisement

4. Troubleshooting

4.5.5.2. Fax Diagnostics

Fax NVM Read/Write
Diagnostics > Fax Diagnostics Fax NVM Read/Write
Purpose
Operation Procedure
Verification
Specification
Reference
Code
Displayed Name
20-200
Pause Dial Time
20-210
Dial Pulse M/B ratio
20-220
Auto Dial Start Pause Time
20-300
Ring On Time
20-310
Ring Off Time
20-320
Ring Detection Freq
20-330
Ring On Max Time
20-340
Ring Off Max Time
20-400
DTMF High-Freq Level
20-410
DTMF Low-Freq Level
20-420
DTMF Timing
20-500
Dial Mode
20-520
Error Rate
20-530
Dial Tone Detect
20-540
Loop Current Detect
20-550
Busy Signal Detect
20-560
TCF Duration
20-800
Modem Speed
20-810
Fax Transmission Level
20-830
Auto Dial Timeout
20-920
CNG Detection Count
20-930
Caller ID
20-940
Ext. Phone
4-37
To change a configuration value for fax firmware.
When the main "NVM Read/Write" window displays, users can navigate through the list of
configuration values that display along with description.
Users can also input a code to the text box to find a configuration value directly.
After selecting one value, pressing "Edit" button will open an interface for user input.
N/A
N/A
N/A
Description
Pause Time (value * 1000ms)
33 / 66 40 / 60
Pause time before auto-dialing (second)
Ring On Time (ms)
Ring Off Time (ms)
sets the Call Indication frequency range that will be detected
by LIU
Ring On Max Time (ms)
Ring Off Max Time (ms)
DTMF High-Freq. Level (dBm)
DTMF Low-Freq. Level (dBm)
DTMF duration of on/off output ( Ms)
Select Tone / Pulse
Adjust Error Rate ( Off / 5% / 10% / 20% )
detect dial tone prior to sending
detect if loop current is present prior to sending
detect busy signal to allow redials
Adjust TCF duration (ms)
Select Modem Start Speed
Adjust Fax Transmission Level (dBm)
Adjust Auto Dial Timeout (second)
CNG Tone Detection check count during ANS/FAX mode.
This option is needed to guide Caller ID off for user
environment.
Ext. Phone Detection Enable/Disable (Default : Enable 1) If
disabled, Ext. Phone cannot be detected by the device.
Copyright© 1995-2013 SAMSUNG. All rights reserved.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl-m4583fx

Table of Contents