Retrieving A Call On Hold (Call Hold Retrieve) - Panasonic KX-TD816 Operating Instructions Manual

1.5 During a Conversation
!
!
PT • During a 5-party conference, you cannot use this feature.
PT • If a held call is not retrieved within a pre-determined time (default: 30 sec.), ringing will be
PT • If an outside call is placed on hold and not retrieved within 30 minutes, it will be
PT • With outside calls, you can put multiple calls on exclusive hold. However, with intercom
• 1.5 During a Conversation, "Placing a Call on Hold (Call Hold)"
• 1.7 Useful Features, "Conference (5-party)"
• See the Installation Manual, Section 3, "Hold".

Retrieving a Call on Hold (Call Hold Retrieve)

Allows you to retrieve a call that has been placed on hold by another extension.
Retrieving an outside call on hold
PT and SLT
At the other extension
Lift the handset or
press
SP-PHONE/MONITOR.
Retrieving an intercom call on hold
PT and SLT
At the other extension
!
! • "Call Park" and "Exclusive Hold" cannot be retrieved by this feature.
• You can hear a confirmation tone when the call is retrieved by entering the feature number.
• 1.5 During a Conversation, "Placing a Call on Hold (Call Hold)"
• See the Installation Manual, Section 3, "Hold".
1-40
Operations
Technical Manuals Online! - http://www.tech-man.com
heard (Hold Recall).
automatically disconnected.
calls, you can put only one call on exclusive hold.
5 3 outside (CO) line no.
Dial 53. Enter the held outside
(CO) line number
(1 through 6).
Lift the handset or press
SP-PHONE/MONITOR.
Confirmation
tone
5 extension no.
Dial 5. Enter the holding extension
number (100 through 199).
PT
At the other extension
CO
Press the CO whose indicator
is flashing red slowly.
• The CO indicator light
turns steady green.
Confirmation tone