1.9
DSS Console Features
• DSS buttons can be changed to any of the following function buttons by Initial Settings.
!
!
• PF buttons can be changed to One-Touch Dialing buttons by Initial Settings.
• When the STORE button is pressed after programming, you will hear beep tones as follows.
• You can check the stored data by pressing the desired button while on-hook. The data will
• 1.2 Proprietary Telephone Settings, "Customizing the Buttons on Your Telephone",
Direct Station Dialing
An extension can be called and accessed, by simply pressing a DSS button. The BLF
shows if the extension is engaged.
PT and DSS Console
[Paired Telephone]
Lift the handset or press
SP-PHONE/MONITOR.
One-Touch Dialing
The stored number is dialed automatically by pressing a programmed DSS or PF button.
PT and DSS Console
[Paired Telephone]
Lift the handset or press
SP-PHONE/MONITOR.
Technical Manuals Online! - http://www.tech-man.com
a) Another DSS Button (Every DSS button can be assigned to another extension number.)
b) One-Touch Dialing Button
c) Day Button (Operator/Manager only)
d) Night Button (Operator/Manager only)
e) Lunch Button (Operator/Manager only)
f) Station Lock Button (Operator/Manager only)
— 1 beep: The entry is different from the one that was stored previously.
— 2 beeps: The entry is the same as the previously stored one.
be displayed.
DSS Button,
One-Touch Dialing Button
Press the desired DSS button.
Press the desired DSS or PF button.
[DSS Console]
[DSS Console]
1-101
Operations