Panasonic KX-TD816 Operating Instructions Manual page 68

1.7 Useful Features
To leave the conference
Any telephone
• The other two parties may continue their conversation.
• If the other two parties are both outside (CO) lines, they will be disconnected.
To talk to the original party while holding the third party
SLT
Flash the hookswitch.
To terminate one party and talk to the other
PT
! • A conference call can also be established by "Executive Busy Override".
!
• When a 2-party call is changed to a 3-party call or vice versa, a confirmation tone is sent to
PT • Pressing a CO button which is not in the conference allows you to exit from the conference,
PT • If the third party does not answer, press the CO button or INTERCOM button to return to
PT • To change a 3-party conference to a 5-party conference, refer to "Conference (5-party)".
SLT • You can return to the original party before the third party answers by flashing the
SLT • If "Hold-2" or "Hold-3" is assigned in System Programming, you must dial "20" after
1-60
Operations
Technical Manuals Online! - http://www.tech-man.com
Hang up or press SP-PHONE.
CO INTERCOM
or
Press the CO or INTERCOM of
the party to remain connected.
• A conversation with the desired party is established and the other
party is disconnected.
all parties. The tone can be disabled.
leaving the other two parties connected unless they are both outside (CO) lines.
If the other parties are both outside (CO) lines, they will be disconnected.
the second party.
hookswitch.
flashing the hookswitch.
Confirmation tone
(optional)
Confirmation tone
(optional)
Talk to the original party.
Talk.