Channel Selection - Sanyo VWM-700 Instruction Manual

CHANNEL SELECTION
r-r----~~~------.
~C LOCK
a
PR OG RAM
TUN ING
~
SETUP
liD SELECT mimi ENTER
TO EXIT PRE SS
l!lml
TUNING BAND: TV
CH ADD/DEL: CH 2 ADD
SOURCE SELECT: TUNER
1111 SELECT I:ICI ADJUST
TO EXIT PRESS
l!m!!l
AUTO CHANNEL SET
PROCEEDING
CHANNEL 13
TO EXIT PRESS l!lill!l
AUTO CHANNEL SET
CH, ADD/DEL : CH 2 ADD
SOURCE SELECT: TUNER
1111 SELECT I:ICI ADJUST
TO EXIT PRESS
l!§ll!l
This VCR is equipped with a frequency synthesized tunei capa-
ble of receiving up to 181 channels. These include VHF chan-
nels 2-13, UHF channels 14-69 and CATV channels 1-125.
PREPARATION
• Connect the VCR to the desired type of antenna or cable TV
system, as shown in ANTENNA TO VCR CONNECTIONS and
CABLE ANTENNA (CATV) CONNECTION (pages 7-9).
• Switch on the power to the VCR and TV.
• Set the TV to the match the VCR output channel (CH 3 or 4).
AUTO CHANNEL PROGRAMMING
1
Press MENU and the MAIN menu will appear.
2
Press
.A
or
'Y
to select the TUNING menu, then press
ENTER. The TUNING menu will appear.
3
Press-. to choose the SOURCE SELECT item, then press
~
or .... to select TUNER.
Press
~
or ..,. repeatedly to switch among TUNER, LINE1 and
LINE2.
4
Press
.A
or
'Y
to choose the AUTO CHANNEL SET item,
then press
~
or ..,. to set the channel.
The tuner will automatically cycle through all available channels
in the area and place them in the tuner's memory.
5
After the AUTO CHANNEL SET PROCEEDING is complete,
make sure the TUNING BAND is set appropriately (TV or
CATV) by pressing
.A
or
'Y
and choosing the correct TUNING
BAND (TV or CATV) by
pressing~
or .... using the TUNING
menu.
• Remember, TV is for the air antenna reception, CATV is for
cable or wireless cable connection .
6
Press MENU to return to the TV screen.
Use CHfTRACK
(~'Y)
or
CHANNEL (.&/'Y) on the front panel
to cycle the VCR through the channels in memory.
19