Table of Contents
Advertisement
2
k—~i
VIDEO CHANNEL SETTING
PREPARATION
If
the VCR
has
been
connected
to the TV using
the
"AV
connection",
simply
set your
TV to
the
"AV"
mode.
Go to -
VCR
TUNING.
6
CIvmge the RFoutput
channel numbercm
the VCR display to a vacant channel
number applicable to your area.
For Australia:
Press the CH (+) button.
--+------------------
-69
RFA
1=
---------------------------- -
29 RFAe
28RF
Press the CH (–) button to return to
channel "28 RF'.
For New Zealand: Press the CH (-) button.
~3613Fn~
=
37 RF n 1+-------------------
69 RF n
.
'-----'m-=------
21 RF n
Press the CH (+) button to return to
channel "28 RF'.
T
Tune the U1-lFchannelonthe
TVtothe
changed RF output channel.
The test pattern will appear.
Adjust the tuning on the TV, if necessary,
so that the test pattern is clear.
8
If
the test pattern stays the same, press the
PRESET
button.
The
VCR
is
turned off.
This completes the video channel setting.
1
2
3
Turn on your TV and set your TV to
"VCR"
or the
position
designated
for
VCR
use (always a position where no TV
programme
is received).
7
(!)/1
PRESET
CH (+,-)
Turn
off
the
VCR
using the
0/1
button.
Press the
PRESET
button on the remote
control for more than 3 seconds.
The VCR display shows the RF output
channel.
(For Australia)
(For New Zealand)
RF converter output
(Video channel)
4
Tune the UHF channel on the TV to the
displayed RF output channel 37 or 36.
The test
pattern
(below)
will
appear.
Area
I
Factory
1
Range
settina
Adjust
the
tuning
on
the
TV,
if necessary,
so that
the
test
pattern
is clear.
5
This completes the video channel setting.
If the test pattern is disturbed or
replaced by a TV station, go to step 6.
If the test pattern stays the same, press
the PRESET button.
The VCR is turned off.
2
krWVCR
TUNING
PREPARATION
Auto tuning
This
VCR
has a built-in tuner capable of
tuning up to 88 TV stations.
The TV stations available in
your
area
will
be
automatically
preset
in order
starting
from
program
me
position
number
"01".
Notes:
During the auto tuning operations, please do not
press any of the buttons or controls on the VCR
or remote control.
Auto tuning is not possible if the VCR is set to
external input
mode.
The
skip
function
will be automatically
set
for all
position
numbers
where
no TV
station
has
been
preset.
Tuning confirmation
When the Auto tuning is finished, the TV station
preset to the lowest programme position number
will be tuned on your TV screen.
Press the CH (+ or –) button to confirm that the
channels tuning has been performed.
Turn on the VCR using the (5/1 button.
!(
WI
CH(+,-)
9 For Australia
The TV stations are meset as follows.
Programme
position
I
6'2"
I
"7"
I
"9"
1
"lo"
"28"
TV station
(MHz)
64.25 182.25 196.25 209.25
527.25
To
keep
the
preset
channel
tuning,
press the
CH (+
or -)
button.
To modify the channel tuning, follow the steps
below.
I
I
For New Zealand
(and Australia,
if
1
necessary)
Press the CHANNEL
(+ and -) buttons on the
VCR
for 3 seconds or more.
CHANNEL ( -, +)
Auto
tuning
will
start.
1'
>
I-J
NOW SEARCH I M
PLEASE
WAIT.
7
Advertisement
Table of Contents
