Tape Counter Memory Feature - Sanyo VWM-700 Instruction Manual

Indicator Panel TV Screen
I
2: : 5 ~ I
I
2:15AM
I
+
CLOCK
+
an
5
I I
0:05:25
I
' - - - - - - - -- ' +
COUNTER
+
I
REM1:07 1
REMAINING TIME
TV Screen
REM 1:07 1
REAL-TIME COUNTER
Shows length of tape run in hours, minutes, and seconds (refer
to the left). Press CLK/COUNT to select the real-time counter
display.
Every press of CLK/COUNT changes the TV screen as illustrat-
ed left.
• Counter changes to 0:00:00 when the cassette is ejected.
• The real-time counter does not operate when nothing is
recorded on the tape.
• The real-time counter will not work when the tape is not insert-
ed.
COUNTER MEMORY FUNCTION
This is useful if there is a section of tape you want to view imme-
diately after recording or if you want to return to the same point
several times.
1
Begin recording or playing a tape.
2
Press CLK/COUNT repeatedly to display the real-time
counter appears on the TV screen.
3
At the point that you want locate later, reset the real-time
counter to 0:00:00 by pressing CLEAR.
4
Continue to play or record.
5
Press STOP when recording or playback finishes.
6
Press REW.
The tape automatically stops when the tape counter returns to
about "0:00:00".
TAPE REMAINING
This function allows the time of the remaining tape to be dis-
played during recording or playback.
Press CLK/COUNT until the REM indicator displays on the TV
screen during recording or playback.
NOTE·
The remaining tape length indicator may not be displayed
correctly depending on the condition of the tape and the kind of
the tape {T-140, T-160, or T-210 etc)