Sanyo VWM-700 Instruction Manual page 35

If you wish to edit or dub your camcorder (or another VCR) recordings to this VCR, the rear
(or Front) panel mounted Audio and Video (AN) input jacks make the connections quick and
easy. The direct AN jacks will also provide better picture results than using the RF jack on the
rear panel.
Another VCR: Play
I
f
(II II )
o
oo\
cj>o
•
From
AUDIO and
VIDEO Output
: OR
·········~------------'
To AUDIONIDEO Input
~
....
..,
1
Connect the camcorder's (or another VCR's) AN outputs to your VCR as illustrated above.
2
Set the input channel "LINE2". (Press INPUT to select LINE2.)
• If you have connected your VCR to the AN input jacks on the rear of VCR, you should
select the input channel LINE1 by pressing INPUT twice.
3
Play the tape in the camcorder (or another VCR) . If you have a TV attached to your VCR,
you can see the video playing.
4
When you desire recording to begin, press VCR's REC once to start.
; NOTE
Before recording, please confirm the recording start position.
35