Lnstallationncr To Tv Connection - Sanyo VWM-700 Instruction Manual

INSTALLATION:
Placing your VCR on the top of or under the TV receiver may result in interference appearing on
the TV screen when the VCR is on. If this occurs, move the VCR to a position alongside the TV
receiver.
VCR TO TV CONNECTION·- - - - - - -
When using the RF coaxial cable (Supplied)
Connect the 75-ohm Coaxial Cable to VHF/UHF/CATV
on the VCR. Connect the other end to the 75-ohm
antenna input on back of the TV.
To AUDIONIDEO IN
AUDIONIDEO Cable (Not supplied)
From AUDIONIDEO OUT
75 ohm Coaxial Cable (Supplied)
To VHF/UHF/CATV
VCR's Back Panel
When using the AudioNideo cable (Not supplied)
TV set
If your TV has AN input jacks, you may connect your VCR's AUDIONIDEO jacks on back of
your TV.
Direct audio/video connections usually result in a better picture and sound quality for tape
playback. Please see your TV's owner's manual for details. Then set your TV to the VIDEO
mode using the TVNIDEO button on your TV.
6