Sanyo VWM-700 Instruction Manual page 22

SETTING THE
CLOCK r ,
~============--~~-
MAIN MENU
II
CLOCK
[i!j]
PROGRAM
~TUNING
~SETUP
Dll SELECT
mmi!
ENTER
TO EXIT PRESS
I!Iml
CLOCK MENU
MONTH : JANUARY
DAY
I
MON
YEAR : 2001
TIME : 12 : 00 AM
8511-Mhl.tw!Ww
TIME ZONE: AUTO
Dll SELECT I:ICI ADJUST
TO EXIT PRESS I!Iml
~ MONTH: JANUARY
~ DAY
:
I
MON
YEAR : 2001
TIME :12 : 00 AM
AUTO CLOCK SET : ON
i.MiW~{.
iAY!!IMV.Ww
Dll SELECT I:ICI ADJUST
TO EXIT PRESS I!Iml
NOTE
There are cases that TV
station does not send or
send wrong date and/or
time information and VCR
set the incorrect time
accordingly.
In this case we recommend
that you set the clock
manually.
22
Things to know before starting \
• The clock uses the 12-hour system. (Be sure to set AM and
PM correctly.)
• The buttons for setting the clock are on the remote control.
• An illogical date will not be accepted (for example:
February 30).
• The initial Clock Setting is JANUARY 1, 2001, 12:00 AM .
PREPARATION
• Turn on the power of both the VCR and TV.
• Be sure the TV is set to the VCR Output Channel (CH 3 or 4).
• If a direct VIDEO/AUDIO connection is made between the
VCR and the TV, set the TV's source selector to VIDEO.
The VCR gives you two ways to set the time and date: the Auto
Clock Feature or manually. The Auto Clock Feature enables the
VCR to set up the clock when the VCR is turned off.
AUTO CLOCK SET
1
Press MENU and the MAIN menu will appear.
2
Press .._
or~
to choose the CLOCK menu.
Press ENTER and the CLOCK menu will appear.
3
Press
T
to choose the AUTO CLOCK SET item.
Press ~ or ..,.. to choose ON.
The Auto Clock Set feature is set to ON at the factory. In the ON
setting, the VCR looks for a channel carrying XDS (Extended
Data Services) information. XDS updates the clock using the
Coordinated Universal Time.
4
Press
T
to choose the DAYLIGHT SAVING item.
Press
~
or ..,.. to choose AUTO, ON or OFF.
If you choose AUTO, the VCR sets the clock using the DST infor-
mation broadcast in the signal (channel).
If you choose ON, the VCR sets the clock when the Daylight
Saving Time is started and ended.
5
Press
~to
choose the TIME ZONE item.
Press
<0111
or ..,.. to choose the correct time zone (AUTO, ESTERN,
CENTRAL, MOUNTAIN, PACIFIC, ALASKA or HAWAII).
If "AUTO" is selected as the time zone, the VCR sets the clock
using the first Coordinated Universal Time information it finds in
a broadcast signal.
6
Press MENU when finished.
7
Turn off the VCR and the auto clock setting works.