Transom Dimensions; Establishing The Center-Line - Suzuki DF70A Setup Manual

TRANSOM DIMENSIONS

DF70A/80A/90A
Unit: mm (in)

ESTABLISHING THE CENTER-LINE

To establish the center of the transom you may use the following
procedure:
(1) Measure across the transom from chine to chine and make
a mark on the transom face at 1/2 of this measurement.
(2) Measure across the transom from strake to strake and
make a second mark on the transom face at 1/2 of this
measurement.
(3) Align a straightedge with the marks on the transom face
and draw a line. This is the vertical center-line of the tran-
som for a single engine installation.
(4) Drill mounting holes as in a single engine installation.
6
360 (14.2)
327 (12.9)
Transom top surface
φ
5 – 13.5
13.5 (0.53)
251 (10) 38 (1.5)
1/2
Chine
1/2 1/2
Strake
1/2