Target Card - Bosch GLM 50 C Operating/Safety Instructions Manual

Target Card

The target card 18 is designed to use your laser mea-
sure where there is no surface to point the laser at
(e.g. the end of a table). Remove the protective cover
from the bottom of the target card. Attach the adhe-
sive portion of the target card to the object you wish
to measure (e.g. the edge of the table). You now have
a surface (target) to point the laser at and get your
measurement.
Bluetooth®
The laser measure is equipped with a Bluetooth® mod-
ule, which enables data transmission via radio technol-
ogy to mobile terminals/devices with Bluetooth® (e.g.,
smartphones, tablets).
For information on the necessary system requirements
for a Bluetooth® connection, please refer to the Bosch
website at www.boschtools.com.
For data transmission via Bluetooth®, there may be
time delays with the communication of your laser mea-
sure to your smart device (smartphone, tablet). This
could be a result of too far of a distance between the
laser measure and smart device to the object that is
being measured.
Activating Bluetooth® for Data Transmission to a
Mobile Device (Smartphone or Tablet)
To activate Bluetooth®, press the Bluetooth® button 6.
Press the plus button 3 [ ] to activate as indicated by
Bluetooth® symbol appearing white and the number 1
highlighted.
-33-
Special Bosch apps are
available to use with your
laser measure to record
and transfer measure-
ments to your mobile
phone or tablet (see App
Quick Start Guide included
in packaging). These apps
can be downloaded in their
respective app stores.