Bosch GLM 50 C Operating/Safety Instructions Manual page 27

C at which you took the measurement will display in
the measured-value lines d.
b. Double indirect height measurement
The laser measure can measure a vertical distance on
a surface, by taking two indirect measurements to that
surface.
Press the function button 7 [Func] and use the plus
button 3 [ ] or minus button 8 [ ] to cycle through
the measurement functions until the highlighted
square appears over the indicator for indirect mea-
surement and the word "Indirect" appears in the
status bar. Press the measure button 2 [ ]. Press
the plus button 3 [ ] or minus button 8 [ ] to cycle
through the indirect measurement functions until the
highlighted square appears over the indicator for dou-
ble indirect height and the words "Double Height"
appear in the status bar. Press the measure button 2
[ ] to select double indirect height measurement.
Press the measure button 2 [ ] to ac-
tivate the laser. Make sure the measur-
ing reference point remains stable.
4'02" 27⁄32
Press the measure button 2 [ ] to
0.0°
8'05" 1 6
take the first measurement A. Press
45.0° the measure button 2 [ ] to take the
second measurement B.
6'02"15⁄ 1 6
The desired indirect height measure-
ment X will display in the result line
e. The measuring values for the distances A and B and
the angle C at which you took the measurement will
display in the measured-value lines d.
c. Indirect Length measurement
Press the function button 7 [Func] and use the plus
button 3 [ ] or minus button 8 [ ] to cycle through
the measurement functions until the highlighted
square appears over the indicator for indirect mea-
surement and the word "Indirect" appears in the
status bar. Press the measure button 2 [ ]. Press
the plus button 3 [ ] or minus button 8 [ ] to cycle
through the indirect measurement functions until the
highlighted square appears over the indicator for indi-
(see figure C)
(see figure D)
-27-