Positioning; Water Drainage - ElectrIQ CD12LE User Manual

Positioning the dehumidifier
A badly positioned dehumidifier will have little effect. In positioning the dehumidifier please
ensure circulation of air in not restricted around the unit.
Allow at least 20 cm space around the unit.
This dehumidifier is designed only for indoor
residential / small office applications and any
commercial or industrial use will invalidate the
warranty.
Use in an enclosed area for maximum efficiency.
Close all doors, windows to create an effective
operating environment. Do not use outdoors.
Your electriQ dehumidifier will begin to protect your
space from the harmful effects of excessive moisture
as soon as it is turned on. Excess moisture is
dispersed throughout your home. For this reason,
the dehumidifier should be positioned in a central and clear location so that it can draw this moist air
towards it from all over the home. A warm hallway or landing is an excellent position for your
dehumidifier. If possible, leave interior doors ajar to allow air circulation.
Alternatively, if you have a serious problem in one area you can begin by positioning the dehumidifier
there and moving it to a more central location at a later date. For the most effective use, run your
dehumidifier with external doors and windows kept closed. Please note the unit should not be placed
directly against a radiator or other heat source.
When positioning your electriQ dehumidifier, ensure that it is placed clear of any obstacle that may
limit the air movement. Place the dehumidifier on a flat dry surface.
Note: Do not force castors to move over carpet or uneven surfaces, nor move the unit with water in
the tank as it may tip over and spill water.

Water Drainage

When the water tank is full, the unit will stop automatically. When this happens the tank full red
light will show on the control panel.
Note: Only empty the water tank when is full or before moving or storing the unit.
There are two ways to dispense collected water.
1. Use the tank.
When the tank is full, the unit will automatically stop running, and the Full
indicator light will flash.
Slowly pull out the tank. Grip tank by its handle securely, and carefully pull
out. Empty the water tank and reinsert it into the dehumidifier. The tank
must be in place and securely seated for the dehumidifier to operate again.
The dehumidifier will re-start when the tank is restored in its correct
position.
10