Konica Minolta bizhub C200 Quick Manual page 83

1
– When directly entering the fax number, touch [Dial], and then use the keypad to type in the number.
– A original can be sent to multiple destinations at the same time (Broadcast transmission). For details
on sending a original to multiple destinations, refer to page 4-9 of this manual.
– If necessary, touch [Quality] or [Fax Menu], and specify the desired settings. For details, refer to
chapter 4, "Transmitting data", of the User's Guide [Network Scan/Fax/Network Fax Operations].
3
Position the original to be faxed.
– To send a original that cannot be loaded into the ADF (a thick original or an original on thin paper),
position it on the original glass.
– Position the original face up in the ADF with the top edge of the original inserted into the feed slot.
– To check the destinations and the settings specified for the functions, press the [Mode Check] key.
For details, refer to chapter 2, "Control panel/touch panel", of the User's Guide [Network
Scan/Fax/Network Fax Operations].
1-10
Basic operations
C200