Shutdown Via Timer; Programming - WMF PROGRAMAT 4 7500 Operating Instructions Manual

5.10.2 SHUTDOWN VIA TIMER

If the operator cannot be present at the end of daily operation,
the machine can be disconnected via a timer.
The machine can be programmed with a maximum of 3 start-
up and shutdown times. The times correspond to weekdays
rather than dates.
For programming see:
6.1.2 EINSTELLEN EIN-/AUSSCHALTZEITEN
Note:
At the time of shutdown, stored coffee will be automatically
drained.

6 PROGRAMMING

The state-of-the-art operation of the WMF PROGRAMAT 4
as well as the simple, user-friendly display allows for easy
programming of various parameters.
For programming use the following keys:
ENTER To enter a particular mode, press the "ENTER"
key.
To exit a particular mode, press the "EXIT" key.
EXIT
To remove within a mode, press
To change standard selections use the
The new selection flashes.
To start programming turn key switch to position "E".
The display indicates:
Position "E" (programming)
By pressing the key, the following information appears on
the display:
Explanation:
Boiler temp. 96°C/next maintenance July 2000, next
descaling after 12,500 litres of coffee, 33 ltr. already brewed.
keys.
keys.
Calibration Mode
[ Info / < ] / ENTER
96°C Nx. Maint. 07.00
Nx. Delim.: 0033/12500
81