Operation; Starting Up The Machine; Switching On (Manually, Without Timer); Switching On (Via Timer) - WMF PROGRMAT GV Operating Instructions Manual

Operation

Starting up the machine

Caution!
The machine may only be started up by
WMF customer service engineers.
Before the machine is started up, the main tap in the fresh
water supply line must be opened and the master power
switch switched on.

Switching on (manually, without timer)

Press On / Off button 3.
The machine is now switched on and heats up (approx. 7
minutes) until it reaches its operating temperature. The hot
water dispensing button

Switching on (via timer)

If your WMF PROGRAMAT GV has been equipped with
a timer 14, the On / Off switch
since the machine can be switched on manually, as well as
automatically via timer
Note that the machine remains a source of potential danger,
even when operated via timer. We therefore recommend
that someone is in attendance when the machine switches
on in order to ensure compliance with the warnings and
safety instructions.
Automatic switching-on:
= Timer active
= Operating condition of the machine(OFF)
The machine is switched off when the timer is set to this
position and switches on automatically at the next
programmed time. (see Chapter 0 Setting times for
switching on and off page 56)
6 flashes slowly during this time.
3 remains On all the time,
14 :
1 2 3 4 5 6 7
14:57
+1h
AM
48