Table of Contents
Advertisement
3M
Pocket Projector 180
™
Status Indicator Light
The status indicator light provides information about the projector's state.
Status Indicator Light
Flashes green three times
Blank
Flashes green
Solid green
Solid amber
Flashes amber
Flashes red twice and
pauses then repeats
Video Mode Icons
The projector will display a video icon when it is connected to a video cable or a
video source. If no cables or devices are detected, the home screen (see "Home
Screen" on page 23) will display.
Icon
NTSC
PAL
RGB 480i 60Hz
800x600 60Hz
© 2010 3M. All Rights Reserved.
Meaning
A new power source is connected to the projector and the
projector is ready to be powered on.
Projector is off. If the power adapter is connected to the
projector, and the battery is installed, the battery has finished
charging.
The projector is starting up.
The projector is on.
The projector is off and charging the battery.
The projector has overheated and needs to cool.
The projector cannot charge the battery.
Description/ Meaning
The projector detects the audio/video cable.
The projector detects an NTSC video input signal.
The projector detects a PAL video input signal.
The projector detects the component audio/video cable.
The projector detects the video input signal and displays the video
source's resolution and refresh rate below the component icon.
The projector detects the VGA-audio cable.
The projector detects computer input signal and displays the input
resolution and refresh rate
The projector does not support the video signal.
The projector is measuring and synchronizing to video input signal.
19
Hide quick links:
Advertisement
Table of Contents
