Indicator Status - 3M MP8635B Operator's Manual

A.6 Indicator Status
The ON, LAMP and TEMP indicators will light or blink in the following cases:

Indicator status

Lights orange
Blinks green
ON indicator
Lights green
Blinks orange
Lights red
*LAMP indicator
Blinks red
Lights red
TEMP indicator
Blinks red
*When the LAMP indicator lights or blinks, turn the power off. If the problem persists, contact your dealer.
A.6
Meaning
Standby mode
During warming up
During operation
During cooling down
Lamp cannot light
Lamp door open.
Lamp module not fully seated.
Lamp operation time 2000 hours.
Temperature inside too high
Cooling fan not operating
™
3M Multimedia Projector MP8635
Remedy
normal
normal
normal
normal
Cool projector by power off for 45 minutes.
Close lamp door.
Fully seat lamp module in projector.
Replace lamp to zero.
Let projector cool 45 minute. Check air flow and filter.
call your dealer
© 3M 1999