Making Connections - 3M MP180 Operator's Manual

3M Pocket Projector 180
™

Making Connections

The 3M 180 projector will display informational icons depending on the input
device and signal being detected. If no devices or input cables are connected to the
projector, the home screen will display. The 3M 180 was designed to operate with
the 3M VGA and AV cables only.
Connecting to a Composite Video Device
Use the AV cable to input video from camcorders, digital cameras, DVD players and
digital media players into the VGA-AV input on the projector.
1 Connect the AV cable to the projector's VGA-AV input.
2 Connect the other end of the AV cable to the video device's audio and video
outputs.
Tip: Some video devices do not have the standard audio and video connections and may
require an AV cable specified by the manufacturer. The AV cable allows you to connect
your video device to your TV monitor or your projector and may be purchased from
the video device manufacturer. Once you have the AV cable, use the cable adapters to
connect the video device cable and the projector cable.
© 2010 3M. All Rights Reserved.
15