Indicator Status - 3M MP8780 Operator's Manual

c) Example of computer signal (continued)
Note 1: MAC adapter is necessary to set the resolution mode.
Projector is compatible with 13 inch mode and 16 inch mode.
Set all dip switches OFF except those indicated below.
MAC 13" mode = switch 1 and 2 are ON
MAC 16" mode = switch 2 and 4 are ON
Note 2: Some input sources may not be displayed properly because they are not compatible with the
projector.
A.6 Indicator Status
The indicators lamps will light or flash to indicate the following operating conditions:
POWER CHANGE
LAMP
Lights
Orange Off
Flashes
Green Off
Lights Off
Green Flash
RED
Lights
RED
Lights Off
Orange
Off
Off
Off
Off
When the LAMP indicator lights or flashes, turn the power off. If the problem persists, contact your dealer.
A-6
Downloaded From projector-manual.com 3M Manuals
COVER FAN TEMP
Off Off Off
Off Off Off
Off Off Off
Off Off Off
Off Off Off
Lights Off Off
RED
Off Lightd Off
RED
Off Off Flashes
RED
Off Off Lights
RED
Off Off Off
3M ™ Multimedia Projector MP8780
(Example of 16 inch mode)
LAMP Meaning
Off Standby mode
Off During warm up
Off During operation
Off The lamp operating
hours have reached
950 hours or more
Off The lamp operating
hours have reached
1000 hours or more
Off Bottom cover is open
Off Cooling fan not
operating
Off Operating temperature
is above normal range
Off Operating temperature
is above normal range
and projector has
overheated
Lights Lamp or internal power
RED failure
Remedy
Normal
Normal
Normal
Replace lamp
Replace lamp
Attach the
Bottom cover
Contact your
dealer
Check the air filter.
Remove any
objects blocking
ventilation. Lower
the ambient
temperature.
Contact your
dealer
Change lamp.
Contact your
dealer
© 3M 1999