3M MP180 Operator's Manual page 21

3M Pocket Projector 180
™
Transfer Files to Projector
The 3M 180 projector has 1 GB of internal memory. To access the projector's
internal memory or the microSD Card memory:
1 Connect the USB cable to the projector.
2 Connect the USB cable to the computer.
3 Turn on the projector
4 The projector will be detected as a removable drive labeled "180" by the
computer. The computer will detect a second removable drive when a
microSD Card is installed into the projector.
5 The projector will display a picture of a PC with a USB cable coming from it.
6 Now the projector is ready to receive a file from your computer.
Important Note: To conserve power, the projector will stop projecting an image
while connected to a computer USB port.
© 2010 3M. All Rights Reserved.
21