Stopping The Dhw Heating; Comfort Function (If Available) - Viessmann VITOPEND Operating Instructions Manual

Stopping the DHW heating

You do not want DHW, but do want to
heat the rooms.
Press the following keys:
1. for settings; "
2. OK to confirm; "
3. OK to confirm; " " flashes.
4. until " " flashes.
5. OK to confirm; the rooms are
heated and DHW is provided
(winter mode).
6. for settings; "
7. for " ".
8. OK to confirm; temperature value
flashes.

Comfort function (if available)

With the comfort function you can pre-
heat the water volume in the plate heat
exchanger to the selected DHW temper-
ature. This makes DHW available imme-
diately.
Press the following keys:
1. for settings; "
2. for " ".
9.
10. OK to confirm; the new tempera-
" flashes. You do not want to have DHW or heat
your rooms.
" flashes.
Press the following keys:
1.
2. OK to confirm; "
3. OK to confirm; " " flashes.
4.
" flashes.
5. OK to confirm; DHW heating and
3. OK to confirm, "COMF ECO"
4. OK to confirm; "ECO" flashes.
5.
6. OK to confirm; the comfort function
" flashes.
DHW heating
to 10 °C.
ture value is saved.
for settings; " " flashes.
" flashes.
until " " flashes.
central heating are stopped,
frost protection monitoring is
activated (standby mode).
flashes.
for "COMF".
is activated.
15