Cab-1 Remote Controller Commands - Lionel VISION 4-6-6-4 Challenger Owner's Manual

TrainMaster Command Control operations

CAB-1 Remote Controller commands

T
he CAB-1 Remote Controller commands are detailed below. The corresponding
RailSounds sound system effects are in bold italic type.
Releases the ElectroCoupler on the front of the
locomotive. Coupler release sound.
Releases the ElectroCoupler on the rear of the
tender. Coupler release sound.
Activates the numeric keypad.
Short steam release sound.
Toggles the headlight and rear light on and off.
Accelerates the locomotive with a clockwise
rotation. Decelerates the locomotive with a
counter-clockwise rotation. Speed-dependent
chuffing sounds. DynaChuff dynamic
chuffing effect.
Activates the locomotive's whistle. Release the
button to discontinue the sound. Whistle
sound, steam effect.
Toggles the bell sound on and off.
Bell sound.
Changes the locomotive's direction. The
locomotive decelerates to a stop and continues
in the opposite direction when you increase the
throttle.
Air release sound.
Increases the locomotive's speed while the button
is pressed. Release the button to return to the
initial speed. Labored chuff.
Decreases the locomotive's speed while the button
is pressed. Squealing brake sounds.
Shuts down all PowerMasters on your railroad.
Stops all TrainMaster Command Control-equipped
locomotives in operation. Use HALT only in emergency situations.
L = 32 speed steps
M = 100 speed steps
H = 100 speed steps
24
SET L M H
with momentum.