2.2 Splitter Components
The front of the ACR splitter is supported by
stainless steel cables. These cables and their
attachments should be regularly inspected.
The splitter cables have an adjustment capability,
however it is recommended to leave the splitter at
the factory delivered settings. The splitter cables
may have some slack while the vehicle is at rest.
When the splitter is loaded, and the cables are
Standard Viper ACR
under tension, the main splitter panel and track
extension should be approximately parallel to the
bottom of frame.
Solid polymer rub strips are attached to the
leading edge of the splitter panel. Regularly
inspect these rub strips to avoid damage to the
carbon fiber splitter panel.
NOTE:
Splitter extension is supplied in the splitter
extension carrying bag.
Extreme Viper ACR