Dodge 2016 Viper SRT ACR Owner's Manual page 19

2.9 CCM Brake Duct Installation
To install the Brake Ducts, follow this procedure:
1. Slide handed brake duct onto the lower control arm, moving from center of
the car outward.
2.
Ensure the brake duct snaps over the bolt already mounted to the lower
control arm.
3. Install the supplied ring clip around the shock fluid line, snapping into the
hole on top of the brake duct.
NOTE: The tie strap included in the package, located in the trunk, can be used to
further secure the Brake Duct to the vehicle.