Dodge 2016 Viper SRT ACR Owner's Manual page 23

3.2 Brake Burnish Procedure
Brake Burnish Procedure
1. Apply the brakes 4 times starting at 50 mph (80 km/h) to 20 mph (30 km/h) while decelerating at 0.3 g.
2. Cool the brakes while driving 50 mph (80 km/h) for 3 minutes.
3. Apply the brakes 6 times starting at 90 mph (145 km/h) to 20 mph (30 km/h) while decelerating at 0.5 g.
4. Cool the brakes while driving 50 mph (80 km/h) for 3 minutes.
5. Apply the brakes 10 times starting at 90 mph (145 km/h) to 20 mph (30 km/h) while decelerating at 0.8 g.
6. Cool the brakes while driving 50 mph (80 km/h) for 3 minutes.
CAUTION:
• Do not come to a complete stop during the break-in procedure. This will imprint pad material onto the rotor,
causing a vibration during future use.
•
Perform the break-in procedure in a safe location. FCA does not endorse speeding on public roads; therefore,
if a safe area cannot be used to achieve the speeds listed above, you must lower speeds to meet posted limits.
• Do not come to a complete stop when the system is hot and leave your foot on the pedal. Pad material will
immediately transfer to the rotor causing a vibration during future use.