Dodge 2016 Viper SRT ACR Owner's Manual page 34

6.0 Guidelines For Track Use (Continued)
During Track Use (After Every Outing)
• Perform a minimum of one cool down lap, using minimal
braking, after each track outing.
• Verify all fluids are at the correct levels.
NOTE: Track use may increase engine oil consumption.
• Continually monitor and record your tire pressures.
• Inspect tires for wear; replace if necessary.
• Inspect brake pads and rotors for wear; replace if necessary.
After Track Use
• Verify all fluids are at the correct levels.
NOTE: Track use will greatly increase wear rates on your Viper ACR,
and will require more frequent service, including fluid changes.
• Return ride heights and shocks to recommended street settings.
• Remove splitter track extension and install street rub strip.
• Remove Diffuser strake extensions (if equipped with Extreme.
Aero package)
• Reinstall louver panel over front wheel arches (if equipped with
Extreme Aero package).
• Reinstall six hood vent screens (if equipped with
Extreme Aero package).
• Inspect suspension system, brake system, prop shaft, and ½
shaft boots for wear or damage.
• Perform a brake bleed procedure to maintain the pedal feel and
stopping capability of your brake system.
• Track usage results in increased operating temperatures of the
engine, transmission, clutch, driveline and brake system. This
may increase the level of noise generated by these components
in normal driving conditions. New components may need to be
installed to return the system to the original performance.
NOTE: Brake Ducts have a low clearance and may be damaged
during street use.