Advertisement
* Be careful when unpacking and installing the product, as excessive force or ripping can
damage the content.
* Considering the size and weight of the product, it is recommended to have two or more
people move the product.
Unpacking
① Place the package on a level floor.
③ Pull the product out of the vinyl bag
(two persons recommended).
⑤ Open the front door and pull out all internal parts
and accessories to make sure that they are all there.
Copyright Reserved HyVISION System Inc.
This document is the Quick Start Guide (141020,kr), and is subject to change without notice when necessary for
product improvements. HyVISION System does not take the responsibility for loss caused by any error in the
document or provisions and use of this document.
Unpacking and Installation (1/4)
② Open the box and remove the top cover.
④ Move the product to its installation location
(two persons recommended).
⑥ Open the top door and pull out the extruder
package.
cable or the Teflon tube.
Be careful not to bend the extruder-driven
Teflon Tube
6
Advertisement
