Advertisement
The printer can be stopped immediately if there is a problem while
Emergency
the printer is in operation.
Stop
Press the 【BACK】 and 【ENTER】 buttons simultaneously to
instantly stop the printer and reboot it (soft reboot)
LCD and Operating Buttons
[1] LCD
[2]ENTER
button
[3]Status
lighting
[4] BACK button
[5]HOME button
LCD Display of Status
When Cubicon Single is turned on or when the menu is not activated for functional setting, the current
printer status is shown on the LCD display.
1
3
5
6
[1] Extruder nozzle temperature
[2] Heating bed temperature
[3] Printer inside standby temp.
[4] Molding fan rotating speed
[5] File for output
[6] Printer operation status
Copyright Reserved HyVISION System Inc.
This document is the Quick Start Guide (141020,kr), and is subject to change without notice when necessary for
product improvements. HyVISION System does not take the responsibility for loss caused by any error in the
document or provisions and use of this document.
Printer Operation and LCD Display
1
BACK
HOME
Shows the current status or menu of the printer
- Launch the function menu
- Rotate Right/Left: Navigate among menus or change a
menu item
- Pressing: Select a menu or setting
Display printer statuses in different LED colors
Being
Status
heated
printing
Color
Red
Move to the previous menu item
Move to the status display
Current temperature/Target temperature
Current temperature/Target temperature
Current temperature/Target temperature
Rotating speed of the molding fan (max. 100%)
Name of the output file in the SD card (in English)
Current printer operation status. If the printer is currently printing, the
current printing time (hh:mm) and progress rate are displayed.
2
ENTER
3
4
5
In
Printing
Standby
Completed
Blue
Green
White
2
4
10
Advertisement
