Powering On The Switch; Verification Before Power-On - HP 5830 series Installation Manual

Figure 39 Setting terminal emulation in Switch Properties dialog box

Powering on the switch

Verification before power-on

Before powering on the switch, verify that:
The power cord is properly connected.
•
The input power voltage meets the requirement of the switch.
•
The console cable is properly connected, the terminal or PC used for configuration has started,
•
and the configuration parameters have been set.
Powering on the switch
Power on the switch (for example, an 5830AF-48G switch), and you can see the following
information:
System is starting...
Booting Normal Extend BootWare....
The Extend BootWare is self-decompressing.....................Done!
****************************************************************************
*
* HP A5830AF BootWare, Version 1.03
32
*
*