S Fp+ Port - HP 5830 series Installation Manual

Product
code
JD101A
IMPORTANT:
You must use the HP X110 100M SFP LC BX 10-U Transceiver (JD100A) and the HP X110 100M SFP LC BX 10-
D Transceiver (JD101A) in pairs.
For the SFP transceiver module specifications, see HP A-Series Switches Transceiver Modules User
Guide.
NOTE:
To guarantee the functionality of the SFP ports, use only HP SFP transceiver modules.
•
The SFP transceiver modules available for this switch series are subject to change over time. For the
•
most up-to-date list of SFP transceiver modules, consult your HP sales representative or technical
support engineer.
NOTE:
The SFP ports (numbered 49 and 50) and the last two 10/100/1000Base-T Ethernet ports (numbered
47 and 48) on an 48G model or 48G TAA model switch forms two combo interfaces. Ports 49 and 47
form one combo interface, and ports 50 and 48 form another. Only one port in a combo interface can
work at a time.
SFP+ port
Every switch has SFP+ ports, and you can plug the SFP+ transceiver modules, SFP transceiver modules,
and SFP+ cables in
SFP+ ports as IRF physical ports to connect the switches in an IRF deployment.
Table 21 10 Gbps SFP+ transceiver modules available for the SFP+ ports
Product
code
JD092B
JD093B
Description
HP X110 100M SFP LC
BX 10-D Transceiver
Table 19, Table
Central
wavelength
Description
(nm)
HP X130 10G
SFP+ LC SR 850
Transceiver
HP X130 10G
SFP+ LC LRM 1310
Transceiver
Central
Fiber diameter
wavelength
(μm)
(nm)
TX: 1550
9/125
RX: 1310
21, or Table 22 into the SFP+ ports as needed. You can use the
Multi-mode
Fiber
fiber modal
diameter
bandwidth
(μm)
(MHz × km)
2000
50/125 500
400
200
62.5/125
160
1500
50/125 500
400
62.5/125 200
58
Max. transmission
distance
15 km (9.32 miles)
Maximum transmission
distance
300 m (984.25 ft)
82 m (269.03 ft)
66 m (216.54 ft)
33 m (108.27 ft)
26 m (85.3 ft.)
220 m (721.78 ft)
220 m (721.78 ft)
100 m (328.08 ft)
220 m (721.78 ft)