Memory Reception; Printing A Document Held In Memory - Konica Minolta bizhub 360 User's Manual [Fk-502 Facsimile Operations
Hide thumbs
Also See for bizhub 360:
- User manual (794 pages) ,
- Product manual (60 pages) ,
- Function manual (16 pages)
Table of Contents
Advertisement
Useful Functions for Reception
8.2
Memory Reception
In the Utility Mode, you can set your FK-502 to receive documents, store
them in memory, and print them out as needed. This mode is called Memory
Reception. The following sections describe the procedures of printing and
deleting the document received and held in memory, assuming that Memory
Reception is already set up.
!
Detail
To set up for Memory Reception, see "Memory RX" on page 11-39.
8.2.1
Printing a Document Held in Memory
Printing a Document Held in Memory
Perform the following procedure to print the document received and held in
memory.
1
Press [Box] on the control panel to view the Box screen, if it is not
already displayed.
2
When an optional hard disk is installed, select [System User Box] tab.
3
Press [Memory RX User Box].
–
When the User Authentication function is set to [ON], [Personal
User Box] tab is displayed.
4
Enter the password and press [OK].
–
To interrupt operation, press [Cancel].
–
If you press [C] (clear), the information you have entered will be
deleted.
5
Select the received document using
bizhub 360
or
and press [Print].
8
8-5
Advertisement
Table of Contents
