Placing The Original On The Machine; Using The Adf - Konica Minolta bizhub 360 User's Manual [Fk-502 Facsimile Operations

Transmission
3.2

Placing the Original on the Machine

The ADF and platen glass can be used to scan originals with this machine.
When an original is placed in the ADF, the original is automatically fed
through the ADF and scanned.
3.2.1

Using the ADF

When using the ADF, multiple originals can be scanned automatically. In
addition, two-sided originals can be sent.
Using the ADF
1
Close the ADF.
2
Align the originals starting with the first page.
3
Place the originals in the ADF with the side to be scanned facing up.
– To make a proper print of the Header Information (Sender
Name/Sender Fax No.), insert the front edge of the original into the
ADF.
4
Adjust paper guides.
– In Mixed Original mode,
extend the paper guides
to fit the largest paper
size, and place the
remaining originals
aligned in the top left
corner.
bizhub 360
3
3-5