About the lamp status
• Red:
Data registered and currently selected
• Green: Data registered but not currently selected
• Off:
No data registered
5
Register various panel setups to other buttons by repeating steps 1 –
4.
The registered panel setups can be recalled by simply pressing the desired number
button.
Saving the Registration Memory as a Bank File
You can save all the eight registered panel setups as a single Registration Memory Bank
file.
1
Press the REGIST BANK [+] and [-] buttons simultaneously to call
8
up the Registration Bank Selection Display.
1
2
Press the [6] (SAVE) button to save the Bank file.
For instructions on saving, refer to page 67.
84
CVP-601 Owner's Manual
Bank 04
Bank 03
Bank 02
Bank 01
NOTE
The panel setups registered in
the numbered buttons are
preserved even when you turn off
the power. If you want to delete all
the eight current panel setups,
turn the power on while holding
the B6 key (right-most B key on
the keyboard).
NOTE
In general, Registration Memory
data (Bank files) is compatible
among the models CVP-609/605/
601. However, the data may not
be perfectly compatible,
depending on the specifications
of each model.
2