making coffee
The X8 machine is designed to function exclusively with "Metodo Iperespresso" capsules
Make sure that the temperature LED is blue and lit solidly
Place a cup under the coffee group . Unlock and lift the opening lever of the capsule compartment until the cap-
sule is ejected and the empty capsule holder falls back to its normal position (if the holder contains a capsule, it
will be expelled and dropped into the used capsule container)
Insert the capsule as shown in the picture and make sure that it is inserted correctly
Note: the capsule must slide easily into the compartment; if this is not the case, change capsule
Lower the lever completely to close the compartment . Rotate the selector knob clockwise; the device com-
pletes the pre-infusion and then coffee is delivered . When the coffee has reached the desired level, stop the de-
livery by moving back the selector knob into the central position
Note: the brewing cycle consists of a first phase called "pre-infusion" (short injection of water in the capsule fol-
lowed by a pause) lasting about 3 seconds and a second phase for brewing
WARNING:
- Capsules are single-dose and can not be used to make two coffees
- Remember to clean the drip tray and empty the used capsule container
- Remember to replace the water in the water tank frequently
36
1
2
3
5
6
2
1
4
3
4
5
6