Advertisement
Installation
Step 1
It is recommended to begin the installation with the main telescopic mounting pole (part
1) and plastic wind speed and wind direction arm (part 2). Connect the first part of the
telescopic mounting pole with the plastic wind sensor arm using the locking mechanism
and making sure it is locked on both sides. Then fix the position of both parts using nuts and
bolts in order to make sure it is well fixed.
If you are using the multi-functional Meteo console, the procedure is the same as if using
the plastic wind sensor arm (part 2). This type of installation is recommended if you wish
to measure wind speed and wind direction at a different height than for example the air
temperature and humidity.
1
1
1
1
Step 2
1
Next install the wind direction (part 3) and wind speed sensor (part 4). It is necessary to
1
make sure that when installing the weather direction sensor, the label "W" on the actual
sensor is in the direction pointing outwards from the plastic mounting arm and connect
the sensor by the locking mechanism to it. Then use nuts and bolts to fix them permanently.
Next connect the wind speed sensor (part 4) with the plastic mounting arm. Just like with
W
the wind direction sensor, first use the locking mechanism and subsequently use nuts and
3
3
bolts for tight connection.
2
2
9
W
3
3
2
2
9
3
2
9
2
6
2
2
9
1
1
2
2
2
9
1
1
4
4
3
2
9
4
4
3
2
9
3
2
9
2
User guide for IP Weather Station WARIO ME13
W
3
2
Step 3
9
6
5
9
Step 4
Attach the entire plastic arm and rain gauge to the main telescoping mounting pole. Then
4
also attach the metal arm with the control unit and the combined sensor to the main
3
4
mounting pole, facing upwards. If you want to increase the overall height of the weather
6
3
2
2
station from the install console, extend the telescopic mounting pole with the other part of
5
8
it. Tighter attachment can be achieved by screwing the control unit arms together. It is not
5
always necessary to use both parts of the main mounting pole and installation can also be
performed using just one of them.
4
2
6
10
5
11
3
2
3
2
Optional temperature
Wind speed and
and humidity sensors
wind direction sensor
11
7
2
4
3
2
9
2
Next step is to complete the plastic rain gauge arm (part 5)
and the rain gauge itself (part 6). Connect both parts
together using the locking mechanism and fix them tightly
by a small screw (part 9).
6
5
4
3
9
6
2
7
7
5
8
4
3
6
3
2
5
7
8
10
POE adapter
data cable
4
3
3
2
4
3
6
2
7
5
8
8
Advertisement
