Advertisement
13
Section – Extensions
This section aggregates all configuration options for additional peripheries that can be
connected to the station and is organized based on the type of the particular periphery.
Tab – Weather station sensors
This option is for connecting additional temperature or temperature / humidity to the
independent S1 and S2 inputs.
Update sensors
This option will search for new sensors in S1 and S2 inputs.
Tab – Heated rain gauge
This option will enable heated rain gauge.
Enable heated rain gauge
This option enables or disables heated rain gauge.
Tab - Device
This option enables extending the weather station with additional functionality or measured
values. Connection of all new peripheries is done using the WBUS receptacle at the weather
station.
Search devices
This option searches for new devices connected to the WBUS. In the displayed list you can
remove disconnected devices as well as add newly detected ones.
User guide for IP Weather Station WARIO ME13
List of connected devices
This list shows all devices currently connected to the WBUS, with the possibility of configuring
or removing them.
14
Section – Location
This section is to specify the location of the weather station in order to correctly calculate for
example the atmospheric pressure, weather forecast etc.
You can use the tool available at www.meteo-pocasi.cz/geograficke-informace/, to easily find the
exact coordinates and elevation of your station just by placing a marker on a map. These you
then subsequently copy to the appropriate fields in the settings.
Location
Name for station location.
Elevation
Setting the correct elevation is very important for the adjustment and calculation of the
atmospheric pressure. If this value does not correspond to the actual elevation of your
station, then the value of sea-level pressure will not be accurate. If the elevation is set to 0,
the sea-level pressure will correspond to the absolute pressure.
Geographical coordinates (GPS)
This option is for specifying the exact geographical coordinates of where the weather
station is placed. The values must be set correctly in order to accurately determine solar
radiation, sun rise and sunset and for correct retrieval of Internet weather forecast.
16
Advertisement
