Advertisement
Latitude (N)
Latitude of the station, value should be given as a decimal number (eg. 49.45820).
Longitude (E)
Longitude of the station, value should be given as a decimal number (eg. 18.14239).
15
Section – Display
Tab – Meteo
This section allows specification of the display and position of the individual measured values
at the Meteo tab. You can drag and drop the individual tabs or enable/disable them. The
Meteo section is divided into two parts – the Main dashboard and the Extended dashboard.
This is for viewing on devices with variable size of the display.
Default view configuration
This option is for configuring default view for the Meteo section.
Tab – View
Here you can specify the display and position of the individual measured values for the
Overview tab.
Reset to default view
This option will restore the default view for the Overview tab.
User guide for IP Weather Station WARIO ME13
16
Section – Email
This section is for specifying information regarding email communication. If you set
a condition and select the option to send email when the condition is fulfilled, then it is
necessary to make sure all these fields are correctly filled in in order for the email to be
delivered. Servers that require SSL encryption for sending emails are not supported. After
filling in the parameters for email communication it is good to test immediately, whether
the setting is correct and the email sending function is working.
Sending emails
Enabling or disabling email sending feature.
Server
Name of the mail server.
Port
Port number of the mail server, default value is 25.
From
Email address of the sender.
Server authorization required
Enable this option if the mail server requires authorization for access.
User name
Specifying user name for access to your mailbox.
17
Advertisement
