Advertisement
z solar radiation
z rain gauge (optionally with automatic heating mechanism)
z weather station can be further connected to two independent cabled temperature or
temperature/humidity sensors (5 and 10 m).
z biometeorological forecast
z current date and time
z elevation
z geographical coordinates
z Moon phase
z zodiac
z sun rise, sun set and day length
z civil twilight and its length
z nautical twilight and its length
z astronomical twilight and its length
z name day for the current and next day
z daily maximum and minimum of the measured values
z short-term weather forecast for the next 6 h
z long-term weather forecast retrieved from the internet for the next 3 days
z 60 minute weather history in 1 min intervals displayed using mini graphs and trends
z daily weather history in 2 min intervals
z weekly weather history in 15 min intervals
z monthly weather history in 60 min intervals
z annual weather history in daily intervals
Extensions
In order to extend the range of measured values, other meteo devices can optionally be
connected to the weather station. The devices are connected to the station via the WBUS
485 interface at a maximum distance from the weather station control unit of 500 m. As
many as 16 additional devices can be connected (maximum distance and device number
depends on the particular configuration and conditions).
User guide for IP Weather Station WARIO ME13
4
Configuration and settings
Status LED diode
z Red light continuously on – SD card not found or reset button pressed
z Green light flashing at 2s intervals - application running, everything OK.
z Green light alternating 1s off, 0.5s on - configuration file not found, default
configuration must be restored
z Alternate flashing of red and green light – data corrupted, default configuration must
be restored.
z Blue light flashing on its own or with any other color – LAN connection detection.
Reset and default button
The button for reset and default configuration restore is next to the LED diode on the side
of the connectors.
Function Restart by pressing button
Press the reset button at the bottom side of the weather station box and if red LED diode
flashes, release the button and the weather station should restart. Successful restoration of
default settings and weather station activity is signaled by flashing of green LED diode on
the control unit.
Function Default configuration by pressing button
Default configuration resets all the parameters of the weather station with the exception of
history data to default values.
Press and hold the reset button at the bottom side of the weather station while it is turned
on. When the red LED diode lights up for 2.5 s, then the green LED diode for 2.5
s and finally the red LED diode again for 2.5 s you can release the button and the
11
Advertisement
