Advertisement
Factory default
This will reset all the values to default configuration. Weather station database will not be
affected.
Control unit restart
This option will restart the weather station control unit.
Database reset
This option will reset the database and thus erase all the data in it.
Technical support
Enabling this feature will allow more detailed logging of the weather station state and
operation for service and technical support purposes.
Status LED diode setting
Option to configure the LED diode flashing mode.
Information
General information about the weather station.
User guide for IP Weather Station WARIO ME13
21
Viewing measurements– section „Meteo"
G
H
I
F
3
E
D
C
B
A
A: Weather station menu; B: Measured values/sensors tab on the main dashboard; C: trend
graph for the last hour; D: daily minimum and maximum values; E: Additional current
weather information; F: Current time; G: Home button, always takes you to the home screen;
H: station location and elevation; I: Current date and name day; J: Current date and time;
K: Log off button; L: Measured values/sensors tab on the extended dashboard
All current weather information can be viewed in the Meteo section. All values are updated in
10 second intervals. The measured and calculated values are displayed in individual tabs and
some tabs can be viewed in two modes – current measured values from the sensor or trend
J
K
L
20
Advertisement
