Panasonic KV-S2065L Operating Instructions Manual page 43

6
Push up on the paper feed roller block
and it will magnetically attach to the
chassis.
•
When attaching the paper feed roller
block to the chassis, do not damage the
roller.
•
You are now finished attaching the paper
feed roller module.
To continue, replace the retard roller
module according
procedure. (The retard roller module is
located in the conveyor.)
7
Pull open the conveyor towards you by
using the indent on the right side.
•
When the conveyor is pulled towards you,
the click-stop
released.
•
When opening the conveyor, be careful
not get your finger stuck in the indent.
8
Pull the right side of the shaft in the
direction of the arrow and hold it there.
(1)
Pull the retard roller module in the
direction of the arrow (2) and then
remove it.
to the following
mechanism will be
Replacing Consumables
Conveyor
2
Retard roller module
Indent
1
Shaft
43