Panasonic KV-S2065L Operating Instructions Manual page 28

Display Panel Instructions
06 Checking the roller cleaning warning
0 6 . C l e a n
W a r n i n g
06 Clearing the roller cleaning warning
0 6 . C l e a n
W a r n i n g
07 Checking the roller modules
replacement warning
0 7 . R e p l a
W a r n i n g
07 Clearing the roller modules
replacement warning
0 7 . R e p l a
W a r n i n g
08 Setting the product ID
0 8 . P r o d u
09 Setting the sleep mode
0 9 . S l e e p
A f t e r
To conserve energy and operating cost,
this scanner is
programmable power save feature. The
scanner is factory set with the power save
feature (sleep mode) turned on to comply
with E S
NERGY TAR
mode is enabled, the scanner enters the
sleep mode when the scanner is idle for 15
minutes.
28
R o l l e r
0 %
R o l l e r
c e R o l l .
0 %
c e R o l l .
c t I D
K V - S 2 0 6 5
M o d e
1 5 m i n .
provided with a
® requirement. If sleep
0%: This is displayed when "Clean Roller Warning ≤≤%"
displayed is cleared.
100%: This is displayed when the roller needs to be cleaned.
When pressing the 1 key and the 2 key simultaneously,
"Clean Roller Warning" will be cleared. Then "Completed" will be
displayed.
0% : This is displayed when "Replace Roll. Warning ≤≤%"
displayed is cleared.
100% : This is displayed when the roller modules need to be
replaced.
When pressing the 1 key and the 2 key simultaneously,
"Replace Roll. Warning" will be cleared. Then "Completed" will
be displayed.
KV-S2065 KV-SS855
KV-S6055
The applications for the scanner which have been set can be
used.
•
An error results if an attempt is made to use a function which
are not provided with the KV-S2065 series of scanners.
•
No guarantees are given for complete compatibility.
After 1 min. T After 60 min.
•
1min. T 60min.
•
To return from the sleep mode, press any key on the scanner
or issue the scan instruction from the application.
KV-S6045
KV-S2055
Disable