HP dat72 5242 User Manual page 38

Section 2: HP 5242 Tape Drive
3.2.1
3.2.2 The Clean/Attention LED (number 2 in Figure 31) uses amber to show:
3.2.3 Additional LED patterns
Any
Any
Figure 12
HP StorageWorks DAT 72 (Models 5242 and 5242-ACL) User's Guide
The Tape LED (number 1 in Figure 26) uses green to show tape activity:
Slow flashing green while the tape loads or unloads
Steady green when the tape is loaded
Fast flashing green during read or write operations
Slow flashing amber indicates that the heads need to be cleaned, or the cartridge is
wearing out.
Steady amber indicates a hard fault. The tape drive should be replaced. Call the Global
Customer Support Center.
Activity – load
or unload
Activity – read
or write
Cartridge loaded
Cleaning Needed
signal
Fault
Power-on (starts with
two steady lights
Additional 5242 LED patterns
Key
Off
Green
Amber
Flash Green
(1/2s on, 1/2s off)
Flash Amber
(1/2s on, 1/2s off)
Fast Flash Green
(1/4s on, 1/4s off)
31 HP Part Number 528296-03 July 2005