Konica Minolta bizhub C20 Reference Manual page 530

Item
Client Certificate
CA Certificate
Server ID
Encryption Strength
Limit Time of Network
Stop
Apply button
Clear button
506
Description
Shows whether or not a client certificate has been
specified.
Specify the settings from the Network - SSL/
TLS page.
Shows whether or not a CA certificate has been
specified for CA reliability verification of server cer-
tificates.
Specify the settings from the Network -
Authentication - CA Certificate page.
Specify the characters for verification through back-
ward matching with the CN attributes of the server
certificate. Specifies the server ID, when EAP Type
is set to EAP-TLS, EAP-TTLS, or PEAP.
Range: Up to 64 characters
Default: [Blank]
Specify the encryption level of TLS packets with
EAP-TLS/TTLS/PEAP. Specifies the encryption
strength, when EAP Type is set to EAP-TLS,
EAP-TTLS, or PEAP.
Choices: Low, Medium, High
Default: Low
Specify the length of time to postpone stopping the
network when authentication fails from the start of
authentication.
Range: 0, 60 - 255 (seconds)
Default: 0
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Configuring the Printer